ADAMS RITE 7140 ELECTRIC STRIKE FOR HOLLOW METAL AND WOOD JAMBS 7140-510-628-00

The Adams Rite 7140 Electric Strike for Hollow Metal and Wood Jambs 7140-510-628-00 has a square flat faceplate, is 24 volts, has a DC continuous or intermittent duty cycle, and is standard/fail secure. (Fail secure means that if the power is interrupted or fails, the door stays locked. That's why it's called "secure": It's default state is locked or secured. So a fail secure lock locks the door when power is removed.)

They are designed for use with Adams Rite deadlatches or cylindrical locksets with 1/2" to 5/8" latchbolt projection.

Remote electrical control of any door equipped with an Adams Rite 4500, 4700, or 4900 deadlatch or cylindrical lockset with 1/2" to 5/8"latchbolt projection. Electrical actuation unlocks the keeper, releasing the latchbolt so the door may be opened without operating the latch itself.

FEATURES

Case: 

• 1" x 3-3/8" x 1-5/8" deep 
• For use in aluminum, hollow metal, or wood applications.

Strike Opening:  

• 5/8" x 1-7/16" x 1/2" deep
• Bolt retaining keeper is stainless steel.
• Strike accepts bolt of any Adams Rite 4500, 4700, or 4900 deadlatch or cylindrical latches.  

Strike Lip:  

• Basic strike has lip of proper length for 1-3/4" thick door that closes flush with jamb edge.
• Lip Extensions 1-1/16 or less
• Where door thickness or jamb shape differs from this standard relationship, lip extension kits are available, specified by last dash number.
• Lip extension kits not available on 7101 or 7131.  

Latchbolt Projection:  

• 1/2" to 5/8"

Standard Package:  

• Individually boxed with mounting screws, mounting clips, adhesive shims to accommodate jamb or stile extrusion thickness greater or less than nominal 1/8".
• 7140 Includes mounting clips and adhesive shims for use where welded tabs are omitted.